01Wall sheathing
Versatile boards for timber and steel frame construction, new builds and renovation.
SulfRock construction boards
Magnesium sulphate boards for wall sheathing, flooring and compatible finishes.
Tested 12 mm SulfRock board
View Intertek A1 test reportApproved-email access · Report 241217005SHF-001
SulfRock boards on site.01 / The range
Four specialist board ranges. A practical solution for every layer of your project.
01Versatile boards for timber and steel frame construction, new builds and renovation.
02A durable alternative to OSB and plywood, with tongue-and-groove options for floor systems.
03Magnesium sulphate substrates with a choice of laminated textures and surface finishes.
04A stable base for render, brick slips, plaster and tiles, for internal and external applications.
02 / Material matters
A magnesium sulphate formulation reinforced with fibreglass mesh. Designed to bring strength, stability and flexibility to construction.
Get the full picture ↓View OnlineDownload PDFThe tested 12 mm board has an A1 reaction-to-fire classification under EN 13501-1:2018, reported in Intertek 241217005SHF-001. This is a board classification; it does not establish a fire-resistance period for an IPS panel or complete building assembly.
A moisture-resistant board formulation for demanding environments, with dimensional stability at its core.
Magnesium sulphate is used in the board formulation instead of magnesium chloride. Tested chloride content: 0.0098%, attributed to the water used in manufacture.
Options for timber and steel frames, multiple edge profiles and a broad choice of finishes to suit your project.
03 / Know your board
Compare the range, then speak to us about the right specification for your build.
| Board range | Thickness | Width options | Test evidence |
|---|---|---|---|
| Wall sheathing | 5 / 6 / 8 / 9 / 10 / 12 mm | 1200 mm | Confirm selected thickness |
| Sub-flooring | 15 / 16 / 18 / 19 / 20 / 22 mm | 1200 mm | Confirm selected thickness |
| Decorative boards | 5 / 6 / 8 / 9 / 10 / 12 mm | 1200 mm | Confirm selected thickness |
| Backer boards | 5 / 6 / 8 / 9 / 10 / 12 mm | 1200 mm | Confirm selected thickness |
Board Fixing Detail
Watch the illustrative SulfRock board fixing sequence. Confirm the fixing specification for your project.
For construction health and safety guidance, visit the Health and Safety Executive.
Health & safety guidanceStandard board sizes: 1200 × 2400 / 1200 × 2700 / 1200 × 3000 mm. Confirm thickness, edge profile and availability with our team.
The tested 12 mm board in Intertek 241203010SHF-001 recorded mean flexural strengths of 20.5 MPa dry and 18.1 MPa wet. These values do not establish results for every listed board thickness.
Thermal evidence: Intertek 260227008SHF-001, issued 11 March 2026, reports 0.159 W/(m·K) and 0.077 m²K/W for its tested 12.22 mm SulfRock-branded board under EN 12664:2001. The earlier ASTM C518 result is 0.180 W/(m·K); these are separate test results. Read the original thermal report (approved-email access).
View OnlineDownload PDFTerrix / SulfRock adapted reference sheet
Branding updated. Original test claims and board dimensions require verification for the supplied SulfRock product.
The brochure lists square, chamfer, tapered T&G, ship-lap and tongue-and-groove profiles for sheathing and sub-flooring. Ask us to confirm the available profile for your chosen board.
Request the relevant test report and specification for the exact product and assembly. Board classifications and complete wall or floor fire-resistance ratings are different; the brochure’s test results should be read with their test conditions.
Decorative boards offer laminated film and melamine paper options. Backer boards are described for render, brick slips, plaster and tiles. Contact the team to check compatibility and installation requirements.
Health & safety files
SulfRock board COSHH draft and supplier safety data for an Intelligent Panel Systems panel component. Check each document’s scope and approval status before use.
PLIXXOPOL RF 2217A — safety data sheet
Plixxent · GB version 1.1.0 · revised 13 May 2026. Check the product name and current supplier sheet before use.
SulfRock / Sulfycor COSHH assessment — DRAFT
Board handling, cutting and drilling. Site-specific signoff and verification of manufacturer safety data and dust composition are still required. Not a supplier safety data sheet.
For wider construction health and safety information, visit the Health and Safety Executive.
HSE construction guidanceManufacturer and brand
SulfRock is the authorised brand name for boards manufactured by Sulfycor New Materials Co., Limited. Sulfycor remains the manufacturer. Original test reports retain their stated manufacturer, sample and scope.
Send your project location, quantities or dimensions, intended use and required dates. Attach drawings or a specification if available. If you are at an early stage, send an outline and we can work through the next steps.
Request a quotationComplete the enquiry form with your project details. To send drawings or other attachments, email info@sulfrockltd.com.
Let’s build something better
Tell us what you’re building.
We’ll help you find the right board.
Read the 30 revised Useful Insights sheets — building materials, insulation, moisture, fire and finishes.
Roof and loft insulation helps reduce heat loss and energy use. This illustrated guide explains how a hot roof space can affect rooms below.

Read UK roof and loft insulation guidance — Energy Saving Trust
Why Traditional Lime Mortar Matters — open the illustration in Useful Information