Page 1
SULFROCK
MAGNESIUM SULPHATE BOARD
Board performance, backed by
product-specific testing.
A clear guide to the tested 12 mm board,
applications and specification checks.
PRODUCT OVERVIEW / SEPTEMBER 2026
Page 2
SULFROCK
MAGNESIUM SULPHATE BOARD
THE PRODUCT
SulfRock Ltd / Product overview / September 2026
02
01 / THE BOARD
A practical building board
Magnesium sulphate board with a reinforced multilayer construction.
SulfRock Ltd supplies magnesium sulphate board
for building applications. The available test
reports concern a 12 mm sample. Confirm that the
board supplied today has the same composition
and specification as the tested sample.
12 mm TESTED BOARD
Other thicknesses and finishes require their own
applicable evidence.
Page 3
SULFROCK
MAGNESIUM SULPHATE BOARD
FIRE EVIDENCE
SulfRock Ltd / Product overview / September 2026
03
02 / REACTION TO FIRE
A1 classification
The classification applies to the sample and construction described in the report.
EN 13501-1:2018
A1
The 12 mm magnesium sulphate board sample was
classified A1 for reaction to fire. Testing used EN ISO
1182:2020 and EN ISO 1716:2010.
Test report 241217005SHF-001; issued 6 January 2025. The
applicant named on the original report predates current
SulfRock branding; confirm product traceability.
This is a board reaction-to-fire result. It does not give a fire-resistance period for a wall, floor or IPS
insulated panel.
Page 4
SulfRock / Intelligent Panel Systems / HomePod / Build Supply
Measured board performance
Keep dated test results separate and match the supplied product.
Earlier board performance report
Intertek 241203010SHF-001, issued 20 January 2025, tested 12 mm sample:
Density: 919 kg/m³. Flexural strength, dry / wet: 20.5 / 18.1 MPa.
Thermal conductivity: 0.180 W/(m·K), ASTM C518 method.
Leachable chloride: 0.0098%. Water absorption: 18.4% by mass, 48 h immersion.
March 2026 thermal report
Intertek 260227008SHF-001, issued 11 March 2026, EN 12664:2001:
Tested thickness: 12.22 mm. Mean test temperature: 23.86°C.
Thermal conductivity: 0.159 W/(m·K). Thermal resistance: 0.077 m²K/W.
The sample is branded SulfRock; the original report calls it magnesium oxide board.
Original supplier and laboratory terminology remains in the unaltered reports.
Read each result in its context
The 0.180 and 0.159 values belong to different reports and test conditions.
Do not present them as a single interchangeable declared value. Confirm the
supplied product matches the tested sample. Chloride is low, not mathematically
zero. Water absorption is not a waterproofing rating.
OCTOBER 2026 / CURRENT CONTENT REVIEW
4
Page 5
SULFROCK
MAGNESIUM SULPHATE BOARD
FURTHER TEST RESULTS
SulfRock Ltd / Product overview / September 2026
05
04 / PERFORMANCE IN CONTEXT
Check the test conditions
The following figures describe the tested board under laboratory conditions.
WATER TIGHTNESS
No drops formed on underside after the specified 24 h test.
FREEZE / THAW
25 cycles: no visible defects; retained flexural-strength ratio 0.96.
HEAT / RAIN
25 cycles: no visible change reported.
FACE SCREW WITHDRAWAL
1,456 N with the laboratory-specified No. 10 Type AB screw.
NAIL-HEAD PULL-THROUGH
Mean maximum load 1,636 N with the specified nail geometry.
Source: Intertek report 241203010SHF-001. These tests do not replace project-specific fixing, weatherproofing or
structural design.
Page 6
SULFROCK
MAGNESIUM SULPHATE BOARD
USES AND SELECTION
SulfRock Ltd / Product overview / September 2026
06
05 / BOARD SELECTION
Specify the right build-up
Board choice should follow the complete application and the relevant supporting evidence.
BACKER BOARD
FLOOR SUBSTRATE
INTERIOR FINISH
Confirm board type, finish, thickness, exposure, framing, fixing pattern, joints and compatibility before ordering.
Page 7
SULFROCK
MAGNESIUM SULPHATE BOARD
PROJECT CHECKLIST
SulfRock Ltd / Product overview / September 2026
07
06 / INSTALLATION
Plan the details
Obtain a project-specific installation method and current safety information before work starts.
01
BOARD
Confirm identity, thickness, dimensions and edge profile.
02
SUPPORT
Set out framing, spans, joints and movement requirements.
03
FIXINGS
Choose the fastener and pattern for the actual substrate and loads.
04
EXPOSURE
Detail moisture protection, interfaces and finish compatibility.
05
SITE SAFETY
Assess cutting dust, manual handling and suitable controls.
Page 8
SulfRock / Intelligent Panel Systems / HomePod / Build Supply
Request the full evidence
Report references identify the method, sample and scope.
Reaction to fire
Intertek 241217005SHF-001: EN 13501-1:2018 A1 for the tested 12 mm board.
This does not establish a fire-resistance period for an IPS panel or assembly.
Board performance and thermal results
Intertek 241203010SHF-001: January 2025 physical, moisture and fixing results
and ASTM C518 conductivity 0.180 W/(m·K).
Intertek 260227008SHF-001: March 2026 EN 12664 conductivity 0.159 W/(m·K)
and resistance 0.077 m²K/W for its tested 12.22 mm sample.
Other original laboratory reports
241111004SHF-001: ASTM E84 surface burning.
241127003SHF-001: ASTM E136 combustibility.
Read each complete report and check its stated manufacturer, sample and scope.
Technical documents and enquiries
https://intelligentpanelsystems.co.uk/technical
Approved-email access is required for the protected technical reports.
07786 388201 / info@sulfrockltd.com
SulfRock website: sulfrock.uk
OCTOBER 2026 / CURRENT CONTENT REVIEW
8
Page 9
SulfRock / Intelligent Panel Systems / HomePod / Build Supply
Wall panel thermal calculations
SulfRock facing boards with Plixxent PU insulation.
Panel build-up
SulfRock 12 mm magnesium sulphate facing boards on each side.
Plixxent PU insulation core selected for the complete project build-up.
Nominal panel Insulation core Layer sum Calculated wall U-value
125 mm 100 mm 124 mm 0.22 W/m²K
150 mm 125 mm 149 mm 0.18 W/m²K
175 mm 150 mm 174 mm 0.15 W/m²K
How to use these values
Nominal panel sizes are rounded product names; exact layer sums are shown.
These are Plixxent A/S wall calculations for the stated layers, not measured
whole-building results. Junctions, openings, fixings and thermal bridges require
project-specific assessment. The 150 mm and 175 mm calculation sheets supplied
on 3 October are dated 13 March 2026; the earlier combined schedule is dated
28 September 2026. Preserve the identity and scope of each source.
Specification and installation
Panel joints, splines, openings, foundations and roof connections follow the
approved project design, drawings and installation method statement.
OCTOBER 2026 / CURRENT CONTENT REVIEW
9
Page 10
SulfRock / Intelligent Panel Systems / HomePod / Build Supply
COSHH assessment
12 mm SulfRock board handling, cutting and drilling.
DRAFT - site-specific signoff required
Read the full assessment and complete local checks before using it as a site
control document. This is not a manufacturer safety data sheet.
What the draft covers
Dust during board cutting, drilling and handling.
Local extraction, housekeeping, suitable respiratory protection and supervision.
Review of board composition, product identity and relevant test evidence.
Current online copy
sulfrock.uk - Health and safety section.
Manufacturer safety data and dust composition still require verification.
Assessment date: 29 September 2026. Draft for competent review.
OCTOBER 2026 / CURRENT CONTENT REVIEW
10
